1HP copper tube fin condenser coil unit on sales
- FOB Price
US $1.0020 - 50 piece
- group name
- Copper tube fin condenser
- Min Order
- 20 piece
- model
- HR-HP-975
- Nearest port for product export
- Ningbo, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, D/P D/A
- Export mode
- Export through agents & Have the independent export and import right
- update time
- Fri, 03 Jan 2020 22:45:02 GMT
Paramtents
Material copper tube, aluminum fin
Corrosion resistant ≥72hrs
Super cleaning compatible to various refrigerant
Packging & Delivery
-
Min Order20 piece
Briefing
Good heat exchange
Quick customer design development
Fast delivery
Accept small quantity
Detailed
China good quality 1HP copper tube aluminum fin condenser unit on sales from china
Typical benefits:
- Well distributed liquid dispensing of windwardarea of evaporator or condenser coil
- High quality mechanical expanding orsuper high pressing hydraulic expanding between copper tube and fins, tightcontacting and optimized heat exchanging.
- Free pitch distance selection, reducethe frost affection in low temperature
- With single or double reverse-flow system, small water resistance, good heat exchanging- With super high temperature vacuum drying, ensure inner without impurity orwater substance.
Application:
Suitable for R134A, R22, R404A, R407C, CO2 refrigerant and so on
Widely used for commercial refrigerators, commercial freezer, air-conditioningsystems ,show case cabinet, dehumidifier, ice maker etc…
Material:
Material: copper tube, aluminum fins, galvanized steel bracket
- Copper tube: O.D.7mm, O.D.9.52mm, O.D.10mm, or other size by request, innerthread groove or smooth tube
- Aluminum foil: hydrophilic or uncoated bare
- Fin type: louver, flat, corrugated or slit fin
- Side plate: galvanized steel plate
Voltage:220V/1/50HZ and 380V/3/50HZ or other type.
Size: from 1/4HP to 10HP
Different alternative condensing fans available: shaded pole or Axial fanmotor.
Producing procedure: tube bending, punching fin, tube expanding, fins installation,drying, welding, leakage test, tube bending, quality inspection, packing
Tightnesstesting: gas testing under 3.0Mpa air pressure
Possible pitch of holes and pitch of rows:
No. | Tube Diameter | Pitch of holes | Pitch of rows | Pitch of fins | Material |
1 | Φ5/8”(15.88mm) | 38.1mm | 33mm | 2.5~12.7mm | Copper tube + aluminum fin |
2 | Φ3/8”(9.52mm) | 25.4mm | 25.4mm | 3.0~8.47mm | |
3 | Φ3/8”(9.52mm) | 25.0mm | 21.65mm | 3.0~6.35mm | |
4 | Φ7mm | 21mm | 18.2mm | 1.8~5.8mm | |
5 | Φ7mm | 21mm | 12.7mm | 1.8~5.8mm | |
6 | Φ7mm | 17.65mm | 13mm | 1.8~5.8mm | |
7 | Φ5/8”(15.88mm) | 25.4 | 22mm | 1.5~3.0mm | Copper tube + copper fin |
8 | Φ3/8”(9.52mm) | 25mm | 12.5mm | 1.5~3.0mm | |
9 | Φ3/8”(9.52mm) | 25.4mm | 19.05mm | 1.5~4.2mm | |
10 | Φ3/8”(9.52mm) | 25mm | 21.65mm | 1.5~4.2mm | SS tube + copper fin |
11 | Φ3/8”(9.52mm) | 20.32 | 17.6mm | 1.5~3.2mm | |
12 | Φ5/16”(7.94mm) | 25.4mm | 19.05mm | 1.5~4.2mm | |
13 | Φ5/16”(7.94mm) | 25.4mm | 15.88mm | 1.5~3.0mm | SS tube + aluminum fin |
14 | Φ7mm | 21mm | 13mm | 1.2~2.5mm | |
15 | Φ7mm | 17.6mm | 13.2mm | 1.2~2.0mm |
Related reference information about condenser and evaporator coils:
Applied Compressor kw(HP) | Heating Dimension (M) | Condensing Capacity (kcal/h) |
0.2 (1/4) | 1.5 | 375 |
0.3 (1/3) | 2.3 | 575 |
0.4 (1/2) | 2.9 | 725 |
0.6 (3/4) | 4.7 | 1175 |
0.75 (1) | 6.2 | 1550 |
1.1 (1.5) | 11.1 / 13.12 | 2775 / 3238 |
1.5 (2) | 13.8 / 16.36 | 3450 / 4090 |
1.9 (2.5) | 17.3 / 20.87 | 4325 / 5217 |
2.2 (3) | 21.6 / 25.56 | 6500 / 7667 |
4.0 | 26 / 30.67 | 8300 / 9500 |
3.75 (5) | 33.2 / 38 | 12500 / 14340 |
5.5 (7.5) | 50 / 57.36 | 12500 / 14340 |
7.5 (10) | 69.2 / 76.68 | 17300 / 19170 |
Ventilator | Row x Column | Outside Dimension | |||
MOTOR | FAN | W | H | L | |
6 W | 200 x 1 | 2 x 10 | 110 | 270 | 295 |
6 W | 200 x 1 | 3 x 10 | 110 | 270 | 295 |
9 W | 225 x 1 | 3 x 10 | 110 | 270 | 375 |
16 W | 250 x 1 | 4 x 12 | 140 | 320 | 375 |
20 W | 300 x 1 | 4 x 14 | 140 | 370 | 425 |
20 W | 300 x 1 | 5 x 14 | 200 | 370 | 465 |
80 W | 350 x 1 | 5 x 16 | 200 | 420 | 505 |
80 W | 350 x 1 | 5 x 16 | 200 | 420 | 625 |
0.1 x 6 | 400 x 1 | 5 x 20 | 200 | 520 | 625 |
0.1 x 6 | 400 x 1 | 6 x 20 | 220 | 520 | 625 |
0.1 x 6 | 400 x 2 | 4 x 20 | 200 | 540 | 1070 |
0.2 x 6 | 450 x 2 | 6 x 22 | 400 | 585 | 1070 |
0.2 x 6 | 500 x 2 | 6 x 24 | 460 | 635 | 1330 |
We can produce by customer order orsample, also can help customer design and produce different models of condenser& evaporator coil.
Welcome sending your drawing or sample to us.