3/8HP copper tube aluminum fin condenser coil unit on sales
- FOB Price
US $1.0020 - 50 piece
- group name
- Copper tube fin condenser
- Min Order
- 20 piece
- model
- HR-HP-308
- Nearest port for product export
- Ningbo, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, D/P D/A
- Export mode
- Export through agents & Have the independent export and import right
- update time
- Fri, 03 Jan 2020 22:44:14 GMT
Paramtents
Material copper tube, aluminum fin
Corrosion resistant ≥72hrs
Super cleaning compatible to various refrigerant
Packging & Delivery
-
Min Order20 piece
Briefing
Good heat exchange
Quick customer design development
Fast delivery
Accept small quantity
Detailed
Typical benefits:
- Well distributed liquid dispensing of windwardarea of evaporator or condenser coil
- High quality mechanical expanding orsuper high pressing hydraulic expanding between copper tube and fins, tightcontacting and optimized heat exchanging.
- Free pitch distance selection, reducethe frost affection in low temperature
- With single or double reverse-flow system, small water resistance, good heat exchanging- With super high temperature vacuum drying, ensure inner without impurity orwater substance.
Application:
Suitable for R134A, R22, R404A, R407C, CO2 refrigerant and so on
Widely used for commercial refrigerators, commercial freezer, air-conditioningsystems ,show case cabinet, dehumidifier, ice maker etc…
Material:
Material: copper tube, aluminum fins, galvanized steel bracket
- Copper tube: O.D.7mm, O.D.9.52mm, O.D.10mm, or other size by request, innerthread groove or smooth tube
- Aluminum foil: hydrophilic or uncoated bare
- Fin type: louver, flat, corrugated or slit fin
- Side plate: galvanized steel plate
Voltage:220V/1/50HZ and 380V/3/50HZ or other type.
Size: from 1/4HP to 10HP
Different alternative condensing fans available: shaded pole or Axial fanmotor.
Producing procedure: tube bending, punching fin, tube expanding, fins installation,drying, welding, leakage test, tube bending, quality inspection, packing
Tightnesstesting: gas testing under 3.0Mpa air pressure
Possible pitch of holes and pitch of rows:
No. | Tube Diameter | Pitch of holes | Pitch of rows | Pitch of fins | Material |
1 | Φ5/8”(15.88mm) | 38.1mm | 33mm | 2.5~12.7mm | Copper tube + aluminum fin |
2 | Φ3/8”(9.52mm) | 25.4mm | 25.4mm | 3.0~8.47mm | |
3 | Φ3/8”(9.52mm) | 25.0mm | 21.65mm | 3.0~6.35mm | |
4 | Φ7mm | 21mm | 18.2mm | 1.8~5.8mm | |
5 | Φ7mm | 21mm | 12.7mm | 1.8~5.8mm | |
6 | Φ7mm | 17.65mm | 13mm | 1.8~5.8mm | |
7 | Φ5/8”(15.88mm) | 25.4 | 22mm | 1.5~3.0mm | Copper tube + copper fin |
8 | Φ3/8”(9.52mm) | 25mm | 12.5mm | 1.5~3.0mm | |
9 | Φ3/8”(9.52mm) | 25.4mm | 19.05mm | 1.5~4.2mm | |
10 | Φ3/8”(9.52mm) | 25mm | 21.65mm | 1.5~4.2mm | SS tube + copper fin |
11 | Φ3/8”(9.52mm) | 20.32 | 17.6mm | 1.5~3.2mm | |
12 | Φ5/16”(7.94mm) | 25.4mm | 19.05mm | 1.5~4.2mm | |
13 | Φ5/16”(7.94mm) | 25.4mm | 15.88mm | 1.5~3.0mm | SS tube + aluminum fin |
14 | Φ7mm | 21mm | 13mm | 1.2~2.5mm | |
15 | Φ7mm | 17.6mm | 13.2mm | 1.2~2.0mm |
Related reference information about condenser and evaporator coils:
Applied Compressor kw(HP) | Heating Dimension (M) | Condensing Capacity (kcal/h) |
0.2 (1/4) | 1.5 | 375 |
0.3 (1/3) | 2.3 | 575 |
0.4 (1/2) | 2.9 | 725 |
0.6 (3/4) | 4.7 | 1175 |
0.75 (1) | 6.2 | 1550 |
1.1 (1.5) | 11.1 / 13.12 | 2775 / 3238 |
1.5 (2) | 13.8 / 16.36 | 3450 / 4090 |
1.9 (2.5) | 17.3 / 20.87 | 4325 / 5217 |
2.2 (3) | 21.6 / 25.56 | 6500 / 7667 |
4.0 | 26 / 30.67 | 8300 / 9500 |
3.75 (5) | 33.2 / 38 | 12500 / 14340 |
5.5 (7.5) | 50 / 57.36 | 12500 / 14340 |
7.5 (10) | 69.2 / 76.68 | 17300 / 19170 |
Ventilator | Row x Column | Outside Dimension | |||
MOTOR | FAN | W | H | L | |
6 W | 200 x 1 | 2 x 10 | 110 | 270 | 295 |
6 W | 200 x 1 | 3 x 10 | 110 | 270 | 295 |
9 W | 225 x 1 | 3 x 10 | 110 | 270 | 375 |
16 W | 250 x 1 | 4 x 12 | 140 | 320 | 375 |
20 W | 300 x 1 | 4 x 14 | 140 | 370 | 425 |
20 W | 300 x 1 | 5 x 14 | 200 | 370 | 465 |
80 W | 350 x 1 | 5 x 16 | 200 | 420 | 505 |
80 W | 350 x 1 | 5 x 16 | 200 | 420 | 625 |
0.1 x 6 | 400 x 1 | 5 x 20 | 200 | 520 | 625 |
0.1 x 6 | 400 x 1 | 6 x 20 | 220 | 520 | 625 |
0.1 x 6 | 400 x 2 | 4 x 20 | 200 | 540 | 1070 |
0.2 x 6 | 450 x 2 | 6 x 22 | 400 | 585 | 1070 |
0.2 x 6 | 500 x 2 | 6 x 24 | 460 | 635 | 1330 |
We can produce by customer order orsample, also can help customer design and produce different models of condenser& evaporator coil.
Welcome sending your drawing or sample to us.